return to home page Computational Chemistry Comparison and Benchmark DataBase Release 22 (May 2022) Standard Reference Database 101 National Institute of Standards and Technology
You are here: Home > Geometry > Calculated > Calculated geometry OR Calculated > Geometry > Calculated geometry

Geometry for SiCl3CH3 (methyltrichlorosilane) 1A1 C3V

1910171554
InChI=1S/CH3Cl3Si/c1-5(2,3)4/h1H3 INChIKey=JLUFWMXJHAVVNN-UHFFFAOYSA-N

G2
This model chemistry uses a geometry from MP2=FULL/6-31G*


Point group is C3v
Atom Internal Principal
x (Å) y (Å) z (Å)   a (Å) b (Å) c (Å)
Si1 0.0000 0.0000 0.2503   0.0000 -0.0000 0.2503
C2 0.0000 0.0000 2.0994   0.0000 -0.0000 2.0994
Cl3 0.0000 1.9141 -0.4615   0.0000 1.9141 -0.4615
Cl4 1.6577 -0.9570 -0.4615   1.6577 -0.9570 -0.4615
Cl5 -1.6577 -0.9570 -0.4615   -1.6577 -0.9570 -0.4615
H6 0.0000 -1.0250 2.4785   0.0000 -1.0250 2.4785
H7 0.8877 0.5125 2.4785   0.8877 0.5125 2.4785
H8 -0.8877 0.5125 2.4785   -0.8877 0.5125 2.4785
Atom - Atom Distances (Å)
  Si1 C2 Cl3 Cl4 Cl5 H6 H7 H8
Si1 1.8491 2.0422 2.0422 2.0422 2.4526 2.4526 2.4526
C2 1.8491 3.1972 3.1972 3.1972 1.0929 1.0929 1.0929
Cl3 2.0422 3.1972 3.3153 3.3153 4.1572 3.3758 3.3758
Cl4 2.0422 3.1972 3.3153 3.3153 3.3758 3.3758 4.1572
Cl5 2.0422 3.1972 3.3153 3.3153 3.3758 4.1572 3.3758
H6 2.4526 1.0929 4.1572 3.3758 3.3758 1.7754 1.7754
H7 2.4526 1.0929 3.3758 3.3758 4.1572 1.7754 1.7754
H8 2.4526 1.0929 3.3758 4.1572 3.3758 1.7754 1.7754
Maximum atom distance is 4.1572Å between atoms Cl3 and H6.
picture of methyltrichlorosilane
Calculated Bond Angles (degrees) (Ignoring Hydrogens)
atom1 atom2 atom3 angle         atom1 atom2 atom3 angle
C2 Si1 Cl3 110.537 C2 Si1 Cl4 110.537
C2 Si1 Cl5 110.537 Cl3 Si1 Cl4 108.385
Cl3 Si1 Cl5 108.385 Cl4 Si1 Cl5 108.385
Calculated Bond Angles (degrees) (Involving Hydrogens)
atom1 atom2 atom3 angle         atom1 atom2 atom3 angle
Si1 C2 H6 110.428 Si1 C2 H7 110.428
Si1 C2 H8 110.428 H6 C2 H7 108.498
H6 C2 H8 108.498 H7 C2 H8 108.498

For information on specific bond angles or dihedrals see the geometry comparison page in section Comparisons > Geometry > Bonds, angles.